Over the side ceramic heating elements

Over the side ceramic immersion heaters are mainly used for heating of chemical baths an liquids in different types of vessels.

Over the side ceramic immersion heaters consist of ceramic elements mounted in tubes of porcelain, acid-proof steel, steel, titanium or quartz glass. The heater has a terminal box of protection class IP55 and supply cord.

As an alternative, over the side immersion heaters can be made of tubular heating elements in acid-proof steel and an adjustable thermostat.

Application fields:

Different types of baths Electrical water heater

 

Over the side immersion heaters
-technical info:

Material

Steel
Acid-proof steel
Titanium
Quartz glass
China

Dimension

Ø 40-45/80 x 450  600  800 mm
Ø 40-45/80 x 1000   1200 mm

Power

500W, 750W, 1000W, 1500W,
2500W, 3250W, 4000W

Connection

Cable

Design

Degree of protection IP 55
Standard range

Others

One of Backer’s over the side immersion heater is produced with tubular elements in acid-proof steel and equipped with a thermostat
30-90°C

Image: Technologies/Suspended wire elements/Over the side ceramic heating elements
Print

Example of products

 

Backer also holds a standard range of over the side immertion heaters.
>> Link to our standard over the side immertion heaters.

Submersible oil heater

The working temperature is regulated via an integrated thermostat/fuse.
For thermostat 70-150°C. For fuse 128°C, 152°C (the temperature of the components is validated on the basis of the desired operating conditions). The heater comes in six standard versions but can also be produced according to other specifications.

>> Technical specification
Material Stainless steel EN 1.4301/SS 2333
Connection Electrical connection 3x1.0 mm², 4 meter cabel
Voltage 230 V or acc. to customer spec.
Hysteres 11°C or acc. to customer spec.
Weight 1.4 - 3.1kg
Assembly No fixing device needed, fixed with integrated magnets in the bottom of the container.
Surface load

0.9W/cm²

Safety

CE marked acc. to LVD. 2006/95/CE  

Others

 Heater complete with thermostat.
Should be at least 3 cm below surfice during use. Not to be used with fluids that have a flame temperature below 190°C

 

>> Standard range

Power W Cutting temp. Dimension
L x W x diam mm		 Art.no
250 40°C 225x74x67 6150 432 301
50 40°C 325x74x67 6150 432 302
1000 40°C 525x74x67 6150 432 303
250 20°C 225x74x67 6150 432 304
500 20°C 325x74x67 6150 432 305
1000 20°C 525x74x67 6150 432 306
 
>> Benefits
  • Integrated temperature regulation
  • High voltage tolerance

Download as pdf document

Print

 

OVER THE SIDE IMMERSION HEATER
Information sheet

 PDF: 4.02.00

OVER THE SIDE IMMERSION HEATER
Product information - submersible oil heater

 PDF: 4.02.01

Print